XDS100v2

Fabio Cervone

Other Parts Discussed in Thread: LM3S3748

Dear colleagues,

There are two models of XDS100V2 , one with 20 pins TI model and other with 20 pins ARM model. Which of them are recommended to connect in P7 on beaglebone board ?

Tks in advance,

Fabio Cervone

over 13 years ago

0 Biser Gatchev-XID over 13 years ago

TI__Guru**** 393215 points

Hi Fabio,

Definitely the TI one. The ARM model has different pinout/signals.

Best Regards

Biser

0 Dhanush Nair over 11 years ago in reply to Biser Gatchev-XID

Expert 1360 points

Hi Biser,

I am using XDS100v2 Emulator for debugging/loading program in to TM4C1237H6 .

it is showing error "unable to find the Target". When I connect the JTAG pins of LM3S3748 evaluation board with my TM4C1237H6 customboard ,I am able to load programs into TM4C1237H6.Hence there is no issue with my custom board hardware.

I think I am facing problem with how to use XDS100-V2.

Please HELP.

Regards,

DHANUSH

0 Biser Gatchev-XID over 11 years ago in reply to Dhanush Nair

TI__Guru**** 393215 points

Dhanush,

This forum does not support the LM3S3748 or TM4C1237H6. Please ask your questions in the relevant forums.

Processors

Processors forum

XDS100v2