Hi all,
I am currently trying to integrate a New sensor driver to DM8127.
I am following the IPNC_RDK_sensor_integration_guide provided in the package.
IF I do changes in the autorun.sh file as suggested in the guide, I get below errors!! I am not able to capture the RAW image using DCC!!
any solution please?
ERROR on conslole while bootup :
[m3vpss ] 23289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 24289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 25289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 26289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 27289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 28289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 29289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 74289: SYSTEM: VPDMA is Busy (0x00060000) !!!
[m3vpss ] 75289: SYSTEM: VPDMA is Busy (0x00060000) !!! ---> ERROR !!!!
[m3vpss ] === I2C0/2 Clk is active ===
[m3vpss ] 75308: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_0] in region 0 ...
[m3vpss ] 75308: Assertion @ Line: 55 in links_common/system/system_ipc_listMP.c: *pOutHndl != NULL : failed !!!