• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 286 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM1808 Mini USB support in PC

Francis Kumar
Expert 1330 points
Other Parts Discussed in Thread: AM1808

Hi All,

 

I am using AM1808 Processor. While connecting the mini USB to Windows XP PC, It has detected as Hardware found.

 

It is detected in PC as “Linux File-CD Gadget” act as a device.  What could be the region. I need to install any supported files to XP PC.

 

My USB A is working with Pen drive. How could I see the AM1808 SD-Card Files in Computer.

 

Thanks & Regards,

Francis Kumar. B

 

  • 0
    TI__Guru**** 176811 points

    Francis

    Is this a AM1808 EVM you are using or a design you did yourself?

    Thanks

    David

  • 0 in reply to David (ASIC) Liu
    Expert 1330 points

    Hi David,

    I have tested with AM1808 EVM and with my own design. Please give your comments.

    All are working except mini USB detection in PC.

    Regards,

    Francis

  • 0 in reply to Francis Kumar
    TI__Guru**** 176811 points

    Francis

    THis "Linux File-CD Gadget", is this a linux driver you got from TI or somehting you wrote on your own? If this is a driver you got from TI, you may want to post the question to the linux driver forum as well. What device do want the AM1808 to be?

    Thanks

    David

  • 0 in reply to David (ASIC) Liu
    Expert 1330 points

    Hi All,

    I am using AM1808 which is running the file system over SD-Card. I have configured the Mini USB driver as mass storage as device. 

    When i am connecting this AM1808 device to computer in Linux it shows "Linux File-CD Gadget". But is not accesing the drive.


    If it is connecting in Windows it shows as mass storage, but it is not shoing any files and no drive. 

    My main intention is to connect to AM1808 device with WINDOS PC using USB mini cable and dump required files without  open SD-Card.

    How the files are copying in Mobile. the same way i am looking. Could please solve my issue.

    Regards,

    Francis