• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

sysbios how to debug in RAM

yonglei zhang
Prodigy 10 points

Other Parts Discussed in Thread: SYSBIOS, TMS320F28335

sysbios 6.33.4.39  CCS5.2

xdctools 3.23.5.23

mcu   tms320f28335 ; 

when I creat a new sysbios project,  I can bulid it correctly.

But when I  load program through jtag emulator ,  it always load to flash;  

how could i load the program in the  ram?

I've tried to modify the cmd ,but  it will produce many problems? 

thankyou

  • 0
    TI__Mastermind 32475 points

    Hi,

    It all depends on where you are placing your program.  Do you have a *.cfg file?

    If you are building a BIOS program then you can place sections by doing:

         Program.sectMap["sectionName"] = "NAME_OF_MEMORY_SEGMENT";   sectionName can be like .text, .data, etc...

    Whats your memory map look like?

    See:  http://rtsc.eclipse.org/cdoc-tip/index.html

    Look at xdc->cfg->Program for more detail

    Judah