SysLink component configuration

Ketan_Patel

From Customer:

Does the Syslink as overall product provides a method to configure the specific components within SysLink? This way we can compile and link only required components.

Like,

1. For our processor DM8148, we would like to configure IPC only between A8 and C674x.

2. We don’t want to use RingIO and FrameQ at all, can we disable those at compile time only?

over 12 years ago

0 Arnie Reynoso over 12 years ago

TI__Expert 6860 points

SysLink doesn't have a ability to configure in/out different component whether they be part of IPC or not. SysLink does have a few knobs that are controllable by the user at build time. They are referenced in the SysLink Install Guide Options section.

For SysLink v2.20 , the Install Guide is at: http://processors.wiki.ti.com/index.php/SysLink_Install_Guide#Options

For SysLink v2.00 & v2.10: http://processors.wiki.ti.com/index.php/SysLink_Install_Guide_-_2.00_and_2.10#Options

For the DM8148, if you are only interested in building for the A8 and C674X, set the SDK=EZSDK which will only build the A8 and C674X libraries and associated examples applications.

Processors

Processors forum

SysLink component configuration