how to flash the sloader the first time

Stefan Gaechter

Other Parts Discussed in Thread: AM3352

hi,

we are developing a AM3352 based system with a NAND flash.

at the moment we are working on the first board bring up and faced some problems.
with jtag (BDI3000) we can connect to the AM335x

the question is how it is possible to write the xloader the first time?

br, stefan

over 12 years ago

0 Keegan@TI over 12 years ago

TI__Expert 5745 points

Hi Stefan,

I'm having some difficulty understanding what exactly you are having trouble doing. Are you trying to build the SPL/u-boot images?

If so, please see our wiki and U-boot User's Guide: http://processors.wiki.ti.com/index.php/AM335x_U-Boot_User's_Guide#Building_U-Boot

If you are trying to flash u-boot onto the device using a debugger/emulator, we have CCS flashing instructions here: http://processors.wiki.ti.com/index.php/AM335x_Flashing_Tools_Guide

There is a lot of information available on our wiki, so please try to consult it as much as possible! If something isn't well explained or needs clarification, feel free to ask here.

I hope that helps.

Best,

Keegan

Processors

Processors forum

how to flash the sloader the first time