Capacitive Touch Screen in AM335x

Balaji Selvam

Prodigy 215 points

Hi All

I am using the following LCD panel in our board.

NHD-5.0-800480TF-ATXI#-CTP

It have an Capacitive touch screen. How to configure the kernel source to support capacitive touch?

Is there any other way to find out the solution for this problem. Please help me to find this out.

Regards

Balaji.

over 12 years ago

0 Renjith Thomas over 12 years ago

Guru 31670 points

Balaji,

According to the document, the touch panel controller used is "FocalTech FT5x06 Capacitive Touch Controller". You can search in your kernel for support for the touch panel controller exists or not. If not, you can check with the vendor whether they provide the capacitive touch driver for their module?

0 shriram over 12 years ago

Intellectual 705 points

Please look at the last post in this thread. Working driver file attached there.

http://e2e.ti.com/support/arm/sitara_arm/f/791/t/255787.aspx?pi239031349=2

Ram

Processors

Processors forum

Capacitive Touch Screen in AM335x