• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 97 subscribers
  • Views 524 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DSP LINK GPP and DSP both side GMAKE buid fails

Hemant Chauhan
Intellectual 795 points
Other Parts Discussed in Thread: OMAPL138

hi

I am working on OMAPL138 EVM from logic PD. I have installed WINCE 6.0 successfully and while building DSPLink for the same following errors observed.

I am using DSPBIOS_5XXX and DSPLink for OMAPL138 platform and following Installation guide and User guide of DSP Link.

following error observed in gpp side dsplink build while executing gmake command

following error observed in dsp side dsplink build while executing gmake command

any suggestions

thanks

  • 0
    Intellectual 795 points

    Hi 

    I am working with OMAP L-138 with Win CE 6.0.

    I am able to move a bi ahead, now while including DSPLink in OS during building OS in VS-2005, I am facing errors because of dsplinkk.dll missing from location C:\WINCE600\OSDESIGNS\OMAPL138_AM18X_TI_DEFAULT\OMAPL138_AM18X_TI_DEFAULT\RELDIR\OMAPL138_AM18X_ARMV4I_RELEASE\DSPLINKK.DLL.

    I am using following software,

    1. WINCE 6.0 (R1, R2, R3 and platform builder) from MSDN

    2. DSP\BIOS 5.33.05

    3. CG_Tool Ver 6.1.14

    4. Active Perl

    5. DSPLink

    6. OMAP-L138_Win CE6.0 Source BSP from Adeono

    I followed all the instructions as per "InstallGuide_WinCE_OMAPL138.pdf", but still I am facing errors in VS-2005.

    The snapshot of log is as under:

    Its urgent, I have been posting it for quite some time,

    do suggest where I am wrong.

    thanks

  • 0 in reply to Hemant Chauhan
    Intellectual 795 points

    Hello

    I have started the process from scratch with all new WINCE and other software.

    Still I am facing same mess. The build logs are attached.  1031.buid log.txt

    I need urgent help on this. can any one help.

    thanks

    hemant