ALSA: Interleaved & non-interleaved?

Prasant J

Hi,

I want to cross check my understanding regarding the ALSA's non-interleaved access method.

What I understand is that when one accesses in non-interleaved mode, then ALSA will receive buffers for all channels and make them interleaved before sending out?
Am I correct?

Or non-interleaved means that the data will be sent out in non-interleaved manner as application writes to alsa-lib?

-Pj

over 12 years ago

0 Don Dapkus over 12 years ago

TI__Guru**** 189399 points

Hi, Pj,

Is there a particular TI product that you are working with?

-d2

0 Prasant J over 12 years ago in reply to Don Dapkus

Intellectual 510 points

Hi,

I'm working with the Beaglebone (TI - AM335x).

0 Don Dapkus over 12 years ago in reply to Prasant J

TI__Guru**** 189399 points

Pj,

OK, I am going to move your post to the AM335x forum then.

-d2

0 Prasant J over 12 years ago in reply to Don Dapkus

Intellectual 510 points

Sorry about posting this in the wrong thread. D2, thanks for moving to the correct place now!

I had posted the same question on the alsa-devel mailing list and got the reply from them. Here's the link:

http://mailman.alsa-project.org/pipermail/alsa-devel/2012-October/056321.html
(Thread subject is: "Non-Interleaved access method?" in case this link does not work or expires, people can still google)

-Pj

Processors

Processors forum

ALSA: Interleaved & non-interleaved?