burn flash in ccs v5

ami adam

We are using CCS3.1 for 5509a dsp.

Now for new developments we have upgraded to C6000 with CCS5.

Is it still possible to burn flash (on the 5509a) from the CCS5 similar to what are doing from the CCS3.1 ?

0 Steve Tsang over 13 years ago

I am not familiar with CCS3.1. The oldest I used is CCS3.3.

CCS5 can load and run any .out file from CCS3.3. Also, you can import legacy project to CCS5.

Can you try?

Regards.

0 ami adam over 13 years ago in reply to Steve Tsang

I had no problem to import the project from CCS3 to CCS5 and load it as well.

My question is how can I also burn flash as I did in CCS3.

0 Steve Tsang over 13 years ago in reply to ami adam

What tool do you use to burn flash in CCS3?

0 ami adam over 13 years ago in reply to Steve Tsang

Signum Jtag.

Processors forum