Enable WEC7 UARTs for AM335x EVM (TMDXEVM3358)

B M

Hi,

I am trying to enable more of the Serial UART on the AM335x evaluation board. I am using the WEC7 ARM-A8 board support package. I have not seen any mention on the Wikis of how to enable more than the 1 UART. Can anyone provide the configuration nedded.

Thanks

over 12 years ago

0 Marlon Jose Masbad over 12 years ago

Intellectual 740 points

You can check you catalog viewer if UART1 to X were included in your image.

If you're interested to reroute the bootloader messages to a different UART number, I would suggest you dig into the bootloader code and modify the routing of the debug. I think it is by default set to UART0?

0 B M over 12 years ago in reply to Marlon Jose Masbad

Prodigy 210 points

Yes they have been enabled in the Catalog.

I think the configuration needs to happen at the pin multiplexing - bsp_padcfg.c.

Processors

Processors forum

Enable WEC7 UARTs for AM335x EVM (TMDXEVM3358)