Problem lcd beagleboard

Kampon Akaraphon

Hello,

I have lq043t3dx02 (Sharp lcd display) connected to the lcd header I think it works(or if it work). This is my question What is my configuration? in the u-boot or kernel

sorry for my question and English ,i'm newbie

ps.I have Beagleboard Rev c

over 13 years ago

0 Cvetolin Shulev-XID over 13 years ago

TI__Guru 65405 points

Hi Kampon,

You should set bootargs in the u-boot. There is one configuration for support of HDMI/DVI monitor output:

setenv bootargs 'console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y vram=8M omapfb.vram=0:8M omapdss.def_disp=dvi omapfb.mode=dvi:1024x768-16'

Tsvetolin Shulev

0 Kampon Akaraphon over 13 years ago in reply to Cvetolin Shulev-XID

Prodigy 20 points

sorry for my question not clear. I used Angstrom Distribution and screen resolution is 480x272 psp display

0 Cvetolin Shulev-XID over 13 years ago in reply to Kampon Akaraphon

TI__Guru 65405 points

Change bootargs with the resolution which you are using.

Processors

Processors forum

Problem lcd beagleboard