test frame capture

ranchu

Guru 20755 points

Hello,

I would like to check frame capture, in the simplest way using RDK. I would like to ask if It is possible to run some test demo for checking if single frame was accepted in input.

Thank you,

Ran

over 12 years ago

0 Badri Narayanan over 12 years ago

TI__Guru 59700 points

You can run the RDK progressive demo (Option 1) and you can type "i" (Print detailed information). THis will print the capture driver statistics including the number of frames captured, the resolution of the frames etc.

0 ranchu over 12 years ago in reply to Badri Narayanan

Guru 20755 points

Hi,

If we input only one frame in Vin (with its sync header), will it result in succesful capturing of this single frame ?

Thank you,

Ran

0 Brijesh Jadav over 12 years ago in reply to ranchu

TI__Guru**** 479035 points

Hi Ran,

I think it should be possible if you are the capture before sending the frame.

Thanks,

Brijesh Jadav

0 ranchu over 12 years ago in reply to Brijesh Jadav

Guru 20755 points

Hello Brijesh,

What does it mean "if you are the capture before sending the frame" ?

Thanks,

Ran

0 Badri Narayanan over 12 years ago in reply to ranchu

TI__Guru 59700 points

"Start capture link before sending the frame"

Processors

Processors forum

test frame capture