OMAPL138:stuck in the "Uncompressing Linux....."

grace fu

Other Parts Discussed in Thread: OMAPL138

Hi,everyone!

I'm a newcomer.I've really puzzled over the question for a long time.I've tried to rebuilt my Uimage ,and reinstalled my ubuntu 10.04,but still,it stucks here:"uncompressing linux..."

I've set the board starting from NANDFLASH.my cpu is OMAPL138,and my board is SEED_DEC138,and here is my uboot environment:

U-Boot > printenv
bootdelay=3
baudrate=115200
bootfile="uImage"
ethaddr=0a:c1:a8:15:fa:c0
ethact=
ip=10.108.51.101
filesize=F60000
fileaddr=C1180000
serverip=192.168.253.77
ipaddr=192.168.253.123
bootargs=mem=128M console=ttyS0,115200n8 root=/dev/nfs
bootcmd=tftp 0xc0700000 uImage; bootm
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 2009.01 (Jan 06 2010 - 11:01:54)

the upper red line is a little strange ,I guess it's from my last setting,but I guess it has nothing to do with the problem since the board can download uImage successfully through tftp.

problems occured after I reset the board:

Environment size: 356/131068 bytes
U-Boot >

U-Boot 2009.01 (Jan 06 2010 - 11:01:54)

I2C:   ready
DRAM: 64 MB
NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3)
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: Bad block at 0x11860000
nand_read_bbt: Bad block at 0x1b7a0000
512 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 300000000 Hz
DDR Clock : 150000000 Hz
Net:   More than one PHY detected.

Hit any key to stop autoboot: 0
Using device
TFTP from server 192.168.253.77; our IP address is 192.168.253.123
Filename 'uImage'.
Load address: 0xc0700000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################
done
Bytes transferred = 1832092 (1bf49c hex)
## Booting kernel from Legacy Image at c0700000 ...
   Image Name:   Linux-2.6.32-rc6
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1832028 Bytes = 1.7 MB
   Load Address: c0008000
   Entry Point: c0008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................

then it stucks here,nothing happens.

over 12 years ago

0 grace fu over 12 years ago

Prodigy 20 points

solved! It is the problem of that red line.I set the environment virables wrong:

the incorrect version is like this:

uboot>setenv bootargs mem=128M console=ttyS0,115200n8 root=/dev/nfs
uboot>nfsroot=192.168.253.77:/opt/workspace/SEED-DEC138/nfs rw
uboot>ip=192.168.253.123:192.168.253.1:255.255.255.0

actually it had reminded me the error of "can't find the rw",and the same error to the "IP" but I ignore it,then when check others' setting,I found that the right way is :

uboot>setenv bootargs mem=128M console=ttyS0,115200n8 root=/dev/nfs nfsroot=192.168.253.77:/opt/workspace/SEED-DEC138/nfs rw ip=192.168.253.123:192.168.253.1:255.255.255.0

.still thanks everyone ,and sorry for interrupt you.

Processors

Processors forum

OMAPL138:stuck in the "Uncompressing Linux....."