XDAIS on C6713

lexa fedotov

Hello.

I need to create XDAIS algorithm on DSP C6713. I try CCSv3.

How to create Xdais project in ccsv3 ? I can't find any manual how to do it.
Should i install XDAIS separately and somehow use without CCS?

over 12 years ago

0 Gunjan over 12 years ago

TI__Expert 7415 points

As part of the XDAIS installation, you have the genalg wizard that you can use to create an XDAIS algorithm for a particular target. Have you tried that yet?

http://processors.wiki.ti.com/index.php/XDM_GenAlg_Wizard_FAQ

0 lexa fedotov over 12 years ago in reply to Gunjan

Prodigy 160 points

Thank you for your answer.

I tried GenAlg Wizard, but it does not support C67P series. Does there exist other method to create xdais project?

0 Gunjan over 12 years ago in reply to lexa fedotov

TI__Expert 7415 points

I wanted to let you know that someone from my team is looking into this and will respond to you shortly.

It may be a patch to the GENALG wizard that will allow you to create an alg for the C67P series.

0 Joseph over 12 years ago in reply to lexa fedotov

TI__Intellectual 1560 points

We will be releasing a patch to the GENALG wizard shortly that will allow you to create an alg for the C67P series. Also, the GenAlg FAQ details how to add a C6x target yourself:

http://processors.wiki.ti.com/index.php/XDM_GenAlg_Wizard_FAQ#How_do_I_add_a_C6x-variant_target_to_GenAlg.3F

0 lexa fedotov over 12 years ago in reply to Joseph

Prodigy 160 points

Thank you very much. I hope this patch will be applied to future GenAlg releases.

Processors

Processors forum

XDAIS on C6713