Error : It is a Invalid Board

Vinoth,

There is a I2C EEPROM on the board which is read by eboot. The read is not always successful because of which its interpreting the data wrong. Board ID is one of the fields there and because of which it fails. I've not checked the issue in detail to analyze on what exactly is wrong with EEPROM read.

 Renjith Thomas,

     thank for your reply.any idea to solve this problem.

    i had not beagle bone bsp for  am335x wec7.0.i had only evm board bsp for am335x wec7.0.

   but i had beagle bone board.

i will  modify for the beagle bone  board.

Vinoth,

If you are using beaglebone then the EEPROM will not be present. So, you can just go to the code where the print is coming from and comment of the function which does the I2C read to EEPROM. 

Renjith Thomas,

  thank for your response

You can also get the WEC7 Board Support Package from Adeneo Embedded. http://www.adeneo-embedded.com/Products/Board-Support-Packages/BeagleBone

You can evaluate the binary for free and the source BSP is $500. This might be a better option than modifying the EVM BSP to work with BeagleBone board.

difference between "Windows Embedded Compact 7 source BSP for AM335x StarterKit" and "AM335x_WEC7 Source BSP"

or

difference between "BeagleBone_WEC7 Source BSP" and "AM335x_WEC7 Source BSP"

i think that  "AM335x_WEC7 Source BSP" is free.

what is the different?

BeagleBone_WEC7 Source BSP is for AM335x beaglebone board. 

AM335x_WEC7 Source BSP is for AM335x EVM from TI.

 "Windows Embedded Compact 7 source BSP for AM335x StarterKit"  is for ?

There is a third board known as AM335x StarterKit. Its different from EVM.

i ported the "AM335x_WEC7 Source BSP "  into beagle bone.It is not worked. it can work or not?

Vinoth,

How did you do the porting? What are the changes made?

>enabling the flag BSP_SAVE_EBOOTCFG_TO_SD in environment
variable

i think that in that  evm am33x bsp has not function for dvi cape(daughter board) of the beagle bone.so i could not see anything  in the monitor from the beagle bone.  

it checks what type board and then it has not code for the daughter board.can you help me?

If you give responses like this I won't be able to respond properly. Your posts has no meaningful information to think about. Seeing something on the LCD is the last step of booting when every driver works fine. Always check the serial/KITL logs for the right and accurate information.

Vinoth,

The BSP is for this board

http://www.ti.com/tool/tmdxevm3358

BeagleBone is a different board. The BSP for EVM will not work directly, there will be some amount of changes required in BSP as the hardwares are different. 

can i change that some amount of changes required in BSP for beagle board.i had only beagle bone.

i read the EVM bsp last 2 weeks.i knew that some amount of changes is required for beagle bone.But i dont know how to do!

Vinoth,

How will I be able help with that? Its really tough. First you've to understand the hardware differences between EVM and BeagleBone and then slowly migrate each every drivers accordingly. Instead of taking all these headaches, you can try to buy the Adeneo BSP for 500 USD.