How enable Debug on vpss,dsp bios ?

mahesh kalmeshwar

Expert 1005 points

How Enable Debug Message like on bois side ?

some of them i used Vps_printf ,I am not getting Messages on serial port/debug terminal .

example file i used:

mcfw/src_bios6/links_common/ipcBitsIn/ipcBitsInLink_tsk.c

src_bios6/links_m3vpss/system/systemLink_tsk_m3vpss.c

With Regrads

Mahesh Kalmeshwar

0 Badri Narayanan over 12 years ago

If you run remote_debug_client.out you should see the M3/DSP prints on the console . Pls refer init.sh:

./bin/remote_debug_client.out ${REMOTE_DEBUG_ADDR} &

0 mahesh kalmeshwar over 12 years ago in reply to Badri Narayanan

Expert 1005 points

It was commented in init.sh

Thank you.

Processors forum