• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error occur after removing the MMC card.

Amit Kothari
Prodigy 10 points

 I connected MMC1 to DM365 with SPI protocol. When remove MMC1 it showing following error,

mmcblk1: error 1 sending read/write command
end_request: I/O error, dev mmcblk1, sector 539872
end_request: I/O error, dev mmcblk1, sector 539880
end_request: I/O error, dev mmcblk1, sector 539888
end_request: I/O error, dev mmcblk1, sector 539896
end_request: I/O error, dev mmcblk1, sector 539904

Before removing card, i copy some file in it . After removal of card, connect it to system it showing file of 0 byte. I could not getting the reason.

please help me out .