A Question About SYS/BIOS

levy zhao

Dear engineer,

I am developping a software wth the sys/bios.But when I put the .far and .fardata sections into DDR3,It cannot work.So I want to know why？Thank you !

Best Regards,

Levy

over 12 years ago

Sasha Slijepcevic over 12 years ago

TI__Mastermind 37985 points

Levy,
what happened when you allocated .far and .fardata to DDR? What's the device you are using, and which version of SYS/BIOS are you working with?

levy zhao over 12 years ago in reply to Sasha Slijepcevic

Prodigy 50 points

Hello,

The version of sys/bios I am working with is 6.32.4.49. I have a multicore system,so I want to copare the performance between them.I have to put all the section in DDR3 because the .far and .fadata must be put in DDR3 in my multicore system.Thanks!

Sasha Slijepcevic over 12 years ago in reply to levy zhao

TI__Mastermind 37985 points

There are various ways how you can put .far and .fardata in DDR3. But I have to know which device and which platform you are using, and if you are using CCS. You can just post here the console window output from CCS, if you are working in CCS, or a command line window output if you are building on the command line.

Processors

Processors forum

A Question About SYS/BIOS