Fingerprint sensor compatible with C5502 eZdsp Development Kit

Yvan-Jacques Lasserre

Hello,

We bought this kit and we don't find fingerprint sensor compatible.

ATW310 can be connected to the kit but it is not sell independently. Can you tell us what sensor can we use with C5502?

Thanks.

0 Mark M over 12 years ago

Hi Yvan-Jacques,

The ATW310 came with the C5515 Fingerprint Development Kit (FDK) - www.ti.com/tool/tmdxbdkfp5515

On the C5502 eZdsp, we made the connector the same as the FDK.

The ATW310 was made by Atrua - aquired by Authentec - aquired by Apple.

I do not know where you can purchase these sensors, but the 8-pin ribbon carries SPI signals as shown below:

Hope this helps,
Mark

0 Yvan-Jacques Lasserre over 12 years ago in reply to Mark M

hello Mark,

Thanks for your answer.This will help us a lot.

Yvan-Jacques

Processors forum