I have a customer who is using a DM6467T. They were using the NAND memory part number NAND01GW3B2CZA6E which worked perfectly. It has since been replaced by MT29F1G08ABADAH4-IT because the first part went end of life. They want to program the NAND via the JTAG emulator, but CCS v4.x gives an error "no pages found". The customer has narrowed it down to the file davincihd_nandflash_id.c where he thinks the device or manufacture ID is not matching.
How and where are the necessary modifications made to allow the replacement NAND device to be recognized?
