• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 311 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CAD/CDA Symbols translations error

hoarylea
Prodigy 30 points
Other Parts Discussed in Thread: TMS320C6678

I have dowloaded the CAD/CAE vendor neutral data file TMS320C6678_CYP_841.bxl from TI website. I used Ultra Librarian to translate this file into several script files that Altium Designer 10 should recognize. But when i use Altium Designer 10 to run those script files, error happens. Can anyone tell me what's wrong resides in? Thanks.

  • 0
    TI__Guru* 84110 points

    Hoarylea,

    The syntax error message is not very helpful, unless the variable shown on the highlighted line does not have a member "X".

    My recommendation is to look back at the original file from TI to see if there is any apparent syntax error, then check with the Ultra Librarian to follow its translation process to find where the syntax error is generated.

    Regards,
    RandyP