• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 392 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

What is the role of Board ID EEPROM on Blaze MDP?

j-breeze
Mastermind 7560 points

Hi Champs,

I'm checking the Blaze MDP processor board schematics (750-2165-109-SCH Rev.A) and found a component "Board ID EEPROM (U1: CAT24C208WI-G)" on page  11.
So, Could you please let me know the role of the component.  I could not find any descriptins of it in the schematics and Blaze Users Guide.

But, is it for configuration of DDR timings on the board?  I found a comment below.

  o [OMAPWORLD] #linux-omap IRC Log on omapworld.org (http://omapworld.com/ozbotlogs/index.php?date=2010-04-28)

       [18:38:35] <sakoman> "NishanthMenon: I'm attempting to read 3 GPIO pins in x-load (a board ID to be used to configure DDR timings)"

Thanks in advance for your cooperation.

Best regards,
j-breeze