USB(OTG) support on DM385EMV

Ravikiran HV

Other Parts Discussed in Thread: DM385

Hi all,

H/w: DM385 EVM
S/w: IPNC_RDK_V3.2

I am trying to use an USB(OTG) device on my hardware. USB is not getting detected on board. Looks like power is not supplied to USB device.

How to get USB up on my setup?

Thanks in advance..

over 12 years ago

0 Vladimir-XID over 12 years ago

TI__Genius 11470 points

Hello,

I am sorry, but according to the feedback I just received: the OTG functionality is not supported on the DM385, and will be removed from the device datasheet and TRM.

Sorry for the inconvenience once more.

Vladimir

0 Ravikiran HV over 12 years ago in reply to Vladimir-XID

Mastermind 8715 points

Hi Vladimir,

Thank you for the reply ..

I want to know about the possibility of connecting USB in Host mode on DM385 EVM(ipnc_rdk_v3.2) also.

Please can you help me on this?

0 Vladimir-XID over 12 years ago in reply to Ravikiran HV

TI__Genius 11470 points

Hello,

I am not familiar with that platform and software release, but for Host mode in menuconfig it should something like:

-> Device Drivers
-> USB support
-> Driver Mode
-> USB Host

It could be enabled by default.

You can refer to this page as well:

http://processors.wiki.ti.com/index.php/Usbgeneralpage#USB_controller_in_host_mode

Vladimir

0 Ravikiran HV over 12 years ago in reply to Vladimir-XID

Mastermind 8715 points

Vladimir.

Thank you. I will try it out as you suggest.

Processors

Processors forum

USB(OTG) support on DM385EMV