How to open trace within my codec codes

Tianhe Wang

Other Parts Discussed in Thread: DM3730

hi,

I add a my own codec to my server, but there are something wrong when run my IUNIVERSAL_process. In order to find out whether data is correct. I want to open trace within my codec codes.

the documents I reference to

http://processors.wiki.ti.com/index.php/Getting_started_with_IUNIVERSAL

http://processors.wiki.ti.com/index.php/TraceUtil

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/ce/latest_2_x/xdoc/ti/sdo/ce/utils/trace/TraceUtil.html

My platform is DM3730, but it didn't work.

thx

over 12 years ago

0 Cvetolin Shulev-XID over 12 years ago

TI__Guru 65405 points

Hi,

It is very possible to have some problems with opening the trace due to using incompatible version of Codec Engine. Pay attention of the note in the TraceUtil description link:

Note: TraceUtil is not supported in Codec Engine 3.x.

You can check on the Codec Engine Product Release page:

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/ce/index.html

Tsvetolin Shulev

0 Tianhe Wang over 12 years ago in reply to Cvetolin Shulev-XID

Prodigy 140 points

Hi Tsvetolin Shulev,

My Codec Engine version is codec-engine_2_26_02_11. I will check my codes.

What tools do we use to trace and debug the codecs in Codec Engine 3.x ?

thx

Tianhe Wang

Processors

Processors forum

How to open trace within my codec codes