CCS 5.3 and trouble with AER library

Mark Duda

Other Parts Discussed in Thread: TELECOMLIB

Hello,

I'm using CCS 5.3. I have Omap L138 board and AER lib from TI to echo cancell. When I try to build my project I receive error:

undefined first referenced
symbol in file
--------- ----------------
_aerCreate ./main.obj
_aerGetSizes ./main.obj
_aerNew ./main.obj
_siuAgcAerEvent ./main.obj
_siuDbgAer ./main.obj
_siu_alloc_aer_buffs ./main.obj
_siu_print_buff_usage ./main.obj

error #10234-D: unresolved symbols remain

I know I don't have .lib to AER file and aer.c file. I only have aer.h. What should I do now? I can't build my projects. Does anyone work with AER on Omap L138?

Regards,

over 13 years ago

0 Lisa TI over 13 years ago

TI__Guru*** 130875 points

Hi Mark,

this is typical of a correction/addition need to the include paths and variables. Or perhaps you need to add a library. Please have a look at this wiki and keep us informed whether it helps.

http://processors.wiki.ti.com/index.php/Include_paths_and_options

Best Regards,

Lisa

0 Mark Duda over 13 years ago in reply to Lisa TI

Intellectual 500 points

Hi,

Yes I know that I need the path to proper library but I think I don't have it :(. I have functions declarations in aer.h file but I don't have definitions (aer.c). I look for it but I can't find it.

Regads,

0 Lisa TI over 13 years ago in reply to Mark Duda

TI__Guru*** 130875 points

Hi Mark,

ok, I suspect your question will be better handled in the BIOS forum and so will move it there.

Best Regards,
Lisa

0 ScottG over 13 years ago in reply to Lisa TI

TI__Mastermind 26780 points

Mark,

I don’t know any details about the AEC-AER libraries… but I think you can download the library you are looking for here: http://www.ti.com/tool/telecomlib

There are some links to Linux or Windows installers, a fact sheet, user manual, etc.

Scott

Processors

Processors forum

CCS 5.3 and trouble with AER library