• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 458 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM8127 support CMOS moved to DM8147 platform

HY Chien
Intellectual 680 points

Other Parts Discussed in Thread: TVP5158

1. Can we use these DM8127 support CMOS moved to DM8147 platform?
DM8127 support CMOS (TI81xx-ISS-03.20.00.00): MT9J003 / AR0331 / MN34041 / MT9P031 / OV10630

2. If through by TI FPDLink, whether it can be achieved?

3. TI81xx-ISS-03.20.00.00 can coexist with TVP5158 driver on the DM8147 platform?

Regards.

Gary

  • 0
    TI__Expert 8780 points

    Hi Gary,

    I think DM8147 is a DVR part with no ISS in it.

    ISS drivers and IPNC software is currently only validated on DM8127 device. This includes DM8127 device clocks and speed grades etc. That said, you may need to check with local sales or FAE to confirm the software support on DM8148. ISS drivers can co-exist with TVP5158 driver on DM8148 platfrom, but you will need to account for I2c (I2C 2) resource sharing between the two.

    Regards

    Rajat

  • 0 in reply to Rajat Sagar
    Prodigy 10 points

    Hi Rajat

      We want to connect CMOS sensor through video input interface on DM8147 platform.

    We want to know McFW can support it？

    TKS / Alan