Hi.
we are using DVRRDK_03.50.xx we have a usb over-current issue.
in the some environment usb over-current can be able to occur.
when i some test, external VBUS Power Controller was shutdowned.
So I want to restart External VBUS Power Controller.
How can I control “USB_DRVBUS”?
i checked ti81xx.c , how can i do that?
below is my log
<log>
usb 2-1: new low speed USB device using musb-hdrc and address 2
usb 2-1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/usb2/2-1/2-1:1.0/input/input0
generic-usb 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-musb-hdrc.1-1/input0
usb 2-1: USB disconnect, address 2
usb 2-1: new low speed USB device using musb-hdrc and address 3
usb 2-1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/usb2/2-1/2-1:1.0/input/input1
generic-usb 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-musb-hdrc.1-1/input0
usb 2-1: USB disconnect, address 3
usb 2-1: new low speed USB device using musb-hdrc and address 4
usb 2-1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: Manufacturer: PIXART
usb 2-1: can't set config #1, error -19
usb 2-1: USB disconnect, address 4
usb 2-1: new low speed USB device using musb-hdrc and address 5
usb 2-1: New USB device found, idVendor=093a, idProduct=2510
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-musb-hdrc.1-1/input0
ti81xx_interrupt 960: CAUTION: musb1: Babble Interrupt Occured
ti81xx_interrupt 961: Please issue long reset to make usb functional !!
ti81xx_interrupt 1059: Babble: devtcl(90)Restarting musb....
evm_deferred_musb_restart 895: deferred musb restart musbid(1)
usb 2-1: USB disconnect, address 5
hub 1-0:1.0: over-current change on port 1
hub 2-0:1.0: over-current change on port 1
</log>
Best Regards.
