How to set Pandaboard ES output 1920x1080p @60Hz from DVI

Younger Su

Hi,

As the titel I have set it out put 1920x1080p @30Hz. But is difficult to set to 60Hz.. The pixel clock is locked below 85MHz, Maybe unlock it could be shot the trouble.

Anyone could help me?

Younger

over 12 years ago

0 Manuel Contreras over 12 years ago

TI__Genius 10545 points

I remember these 2 posts about similar issue with timings

http://e2e.ti.com/support/omap/f/849/t/189552.aspx?pi239031349=2

http://e2e.ti.com/support/omap/f/849/p/204887/729388.aspx#729388

Are you using a Panda board with OMAP4460? this question just to fill some missing information from the post.

0 Younger Su over 12 years ago in reply to Manuel Contreras

Intellectual 380 points

yes, i am usting Pandaboard with OMAP4460.

0 Younger Su over 12 years ago in reply to Manuel Contreras

Intellectual 380 points

Hi, Manuel

Could u give me some detail advice?

Younger

0 Manuel Contreras over 12 years ago in reply to Younger Su

TI__Genius 10545 points

I don't have much information about it, I remember those 2 posts.

Processors

Processors forum

How to set Pandaboard ES output 1920x1080p @60Hz from DVI