• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 299 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Am3359 EtherCAT Stack compilation

Bindu Ganesh
Expert 2220 points
Other Parts Discussed in Thread: SYSBIOS

Tried to build the project " Ether_appl " as per the procedure mentioned in page 12 of "AM335x SYSBIOS Industrial SDK 01.00.00.04 User Guide.pdf", but with Build error, header fiiles missing,

can you guide me the exact procedure to build the EtherCAT stack code successfully.

Thanks,

Bindu

  • 0
    Expert 2220 points

    Tried to build the EtherCAT Stack , by adding the missing Header files mentioned in error , but now ended up with below errors

    unresolved symbols remain 
    errors encountered during linking; "ecat_appl.out" not built ecat_appl.

    Can you guide me, how to proceed further?

    Thanks,

    Bindu

     

  • 0 in reply to Bindu Ganesh
    TI__Mastermind 44306 points

    First of all you should always use latest code and documentation.

    Can you please upgrade to IA-SDK 1.0.0.7?

    Can you provide the names of missing symbols? That should help to understand your issue. I assume you followed the patch process?

    1.0.0.7 should be used together with SSC 5.01. Other combinations might not work...

    Regards.