• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Configuring GPIO pins at oampl138 as input

Tanya Groysberg
Prodigy 120 points

Hi,

I tried to configure the gpio0_12 and 0_13 as input and the data at IN_DATA01 register doesn't change while in the scope the change is seen. The pinmuxing configuration seems to be right. Any ideas?

Thanks in advance,

Tanya