decode and display 2560 * 896 resolution video file problem

fei li1

running run_mcfw_demo script in DM8168 board , choose 5 (decode+ display), when read 1 channel 2560*896 video file ,it happen error.how to modify the code in order to successful decode and display 2560 * 896 resolution video file ?

over 12 years ago

0 Badri Narayanan over 12 years ago

TI__Guru 59700 points

In the ini file you should use correct resolution as below:

[file00]
path      = <path_to_file>
width     = 2560
height    = 896
enable    = 1
codec     = h264
numbuf    = 0
displaydelay    = 0

0 fei li1 over 12 years ago in reply to Badri Narayanan

Intellectual 360 points

Thank you !

In the ini file, that is what I write. but it happened error: ASSERT<ipcBitsOutLink_tsk.c | ipcbitsoutlink_get_resolution_class|81>.

What should I do?

0 Badri Narayanan over 12 years ago in reply to fei li1

TI__Guru 59700 points

Which RDK release are you using. You seem to be using a unsupported version. Pls migrate to DVR RDK 3.5 release

Processors

Processors forum

decode and display 2560 * 896 resolution video file problem