decode +display problem

fei li1

Hello!

four screen respectively connect DVI , HDCOMP, CVBS and HDMI port on DM8168 board, run run_mcfw_demo script, choose 5 (decode+display) ,read four channels 1080P video files. How to display respectively 1 channel video file in each screen ?

over 12 years ago

0 Badri Narayanan over 12 years ago

TI__Guru 59700 points

8168 can have 2 independent HD (HDMI/DVO2) + 1 Tied HD (HDCOMP tied to either HDMI or DVO2) + 1 SD display.

The decode display demo does not support SD display

So the demo only has two independent displays.

So what you mentioned (1channel video in each screen) is not possible

0 fei li1 over 12 years ago in reply to Badri Narayanan

Intellectual 360 points

Thank you very much!

what is SD display used to do? where is SD display used ?

0 Badri Narayanan over 12 years ago in reply to fei li1

TI__Guru 59700 points

By SD I mean CVBS display.In decode display demo CVBS is not used.(Disabled)

Processors

Processors forum

decode +display problem