DDR3L support

Bill Lynn

Prodigy 70 points

Other Parts Discussed in Thread: TPS65217

Does TI have plans to provide 1.35V (DDR3L) support with TPS65217? If so, When?

Need to make a design decision ASAP, please advise.

Thanks,

Bill

over 12 years ago

0 Biser Gatchev-XID over 12 years ago

TI__Guru**** 393215 points

Hi Bill,

There is no publicly available information about that. However a lot of DDR3L parts are backward compatible with DDR3 (that is, if they are powered from 1.5V they behave as standard DDR3). I would suggest that you check if the memory part you intend to use has this capability. This will give you some additional design flexibility.

0 Michael Questo over 12 years ago in reply to Biser Gatchev-XID

TI__Expert 6000 points

This question is also addressed in the following thread.

AM335x DDR3L instead of DDR3

http://e2e.ti.com/support/arm/sitara_arm/f/791/p/245517/886538.aspx#886538

Processors

Processors forum

DDR3L support