C6748_LCDK McASP

haorong huang

Other Parts Discussed in Thread: TMS320C6748

Hi,

I according to the documentation, import the Texas Instruments \ pdk_C6748_2_0_0_0 \ C6748_StarterWare_1_20_03_03 \ build \ c674x \ cgt_ccs \ c6748 \ lcdkC6748 \ McASP CCS projects, with a pickup from LCDK J10 interface of the top, with a sound transmitter connect J10 interface of the bottom, running CCS Debug, start running, very sharp sound transmitter has a high output of voice. Then I imported the evmC6748 \ McASP project, after the operation there is no voice broadcast. Could you tell me how to run normally? (I'm using CCSv5.1, XDS100v2).

Thanks!

over 12 years ago

0 Iyshwarya Gopalakrishnan over 12 years ago

TI__Intellectual 1585 points

Hi,

Kindly let us know which board you are using? You have said about both C6748LCDK and evmC6748.

Also clarify whether you are able to run the McASP project in LCDK board and you are facing issues with only McASP project on evmC6748 board?

NOTE: The McASP project of evmC6748 will not give you results in C6748LCDK kit.

Regards,

Iyshwarya

If this answers your question, please click the Verify Answer button below. If not, please reply back with more information.

0 haorong huang over 12 years ago in reply to Iyshwarya Gopalakrishnan

Prodigy 30 points

Hi,

i am using TMS320C6748 DSP Development Kit (LCDK),it's only single DSP.this borad can run RTC and timer projects both evmC6748 and lcdkC6748 folder.

Regards.

0 haorong huang over 12 years ago

Prodigy 30 points

Because my players do not have to adjust the volume, I modified the aic31.c code,turn it down.now this running normally.

Processors

Processors forum

C6748_LCDK McASP