• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 166 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

NAND flash

Gusti averbuch
Prodigy 50 points

Hi,

I am doing a design with the DM8168 Netra. I like to change the NAND flash to a larger flash then the EVB board. The DM8168 can support up to 64Gb NAND. I would like to use MT29F32G08ABAAAWP-ITZ by micron. Do Netra can support this NAND flash?

Thanks

  • 0
    Guru 10655 points

    hi,

    Because the datasheet isn't public, pls refer to following section in sprugx8.pdf  and check if the characteristic of your NAND flash fits the requirement such as capacity, device ID, Bus width, page size...etc

    25 ROM Code Memory and Peripheral Booting -> 25.7 Memory Booting -> 25.7.3 NAND ->  table 25-12 Supported NAND Devices