• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 99 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Need help for developing Pen drive

Nandakumar MReddy
Prodigy 195 points
Other Parts Discussed in Thread: OMAPL138

Hi,

I need an suitable memory IC to develope pen drive of 16Gb capacity. Also pls share me the software which is needed for pen drive working

regards

Nandakumar

  • 0
    TI__Guru** 116170 points

    Nandakumar,

    This is a OMAPL138 device forum. The major components on a pen drive (US B flash drive) is a USB mass storage controller and a NAND flash memory chip so this is not the right forum.

    Regards,

    Rahul

  • 0 in reply to Rahul Prabhu
    Prodigy 195 points

    Hi,

    So can you please direct me to the right forum. I need the scehmatic and chip details of the USB flash drive(pen drive). Kindly help me

    Regards

    Nanda Kumar M

  • 0 in reply to Nandakumar MReddy
    Mastermind 7925 points

    Why would you develop device that will most likely will be more expensive than currently available ones? The fact you are writing in this forums shows that you should spend more time doing research on your application. Using OMAP for pendrive would be like driving your kids to school by crop harvester...

    If you are interested in mass production I believe TI does not have parts you need. I suggest Googling "flash chip 16gb" and see what manufacturers provide such devices.

    Regards,
    Maciej