About the configure parameter of the GraphicsSDK attachment package

Kazushi Kutsuzawa

Please give the configure parameter of the build procedure or the build of the XORG package included in GSDK4.8.0.2.

graphics-sdk_4.08.00.02/targetfs/xorg_source/XOrg-sources.tar.gz
eurasiacon/freedesktop/X.Org/X11R7.4/dist/tarballs/xorg-server-1.10.1
eurasiacon/freedesktop/X.Org/X11R7.4/dist/tarballs/pixman-0.20.2

Best regarts.

over 12 years ago

0 Cvetolin Shulev-XID over 12 years ago

TI__Guru 65405 points

Hi,

You can read and follow the Graphics SDK Quick installation and user guide and pay attention on the chapter 3.5.2 Xorg build at the link:

http://processors.wiki.ti.com/index.php/Graphics_SDK_Quick_installation_and_user_guide

You can read and another useful tutorial about 3D Graphics SDK User's Guide:

http://processors.wiki.ti.com/index.php/3D_Graphics_SDK_User%27s_Guide

Tsvetolin Shulev

0 Kazushi Kutsuzawa over 12 years ago in reply to Cvetolin Shulev-XID

Prodigy 40 points

Thank you for the answer.

The source of xorg is customized in me, and it gives and it thinks configue parameter necessary for the repeated build to would like it.

The binary of each package has already been stored in GraphicsSDK, and the package is recognized only doing the build but the copy in the installation described in the document.

The package to be customized is two of the following.

eurasiacon/freedesktop/X.Org/X11R7.4/dist/tarballs/xorg-server-1.10.1

eurasiacon/freedesktop/X.Org/X11R7.4/dist/tarballs/pixman-0.20.2

Processors

Processors forum

About the configure parameter of the GraphicsSDK attachment package