I am getting indication "sp outside Stack!" in ROV window

sunil hs

hi,

i am using sys/bios 6.33.04.39 shiped in CCS 5.2 for my project.

i have created a TYPICAL project here

.i build my project and debug it. after some times it is ABORTING . when i check the ROV->all modules->ti->sysbios->knl->task->detailed. it showing RED marked at one of my task stack and when i point my cursor there it is showing "SP OUTSIDE STACK".i will attach a snap shot of that

.please do have a look and suggest me how to go about it in solving the issue.

thanks and regards

sunil

over 12 years ago

0 sunil hs over 12 years ago

Intellectual 525 points

Hi,

Please find attachment for MAP, Configuration and .CMD files which I forgot to attach in earlier post.

its zipped in the below folder.

6724.folder.rar

Thanks & Regards,

Sunil

0 Whitney Dewey over 12 years ago in reply to sunil hs

TI__Guru 53745 points

Hi Sunil,

Can you try increasing the stack size of the task that's showing the error in ROV and see if that helps? Also, can you check the "Scan for errors..." tab in the BIOS section of ROV to see if there are any other errors?

Thanks,

Whitney

Processors

Processors forum

I am getting indication "sp outside Stack!" in ROV window