dss signal for pclk less than 60MHz

pushpanathan l

Prodigy 50 points

Other Parts Discussed in Thread: DM3730

I am working DM3730 processor. In that DSS_D18-24 pin are multiplexed with BOOT option pins.

I want to know whether we can use these pins for PCLK less than 60 MHz..

over 12 years ago

0 Cvetolin Shulev-XID over 12 years ago

TI__Guru 65405 points

Hi Pushpanathan,

You can find information about the DSS Power Domain Clock Controls in the TRM Figure 3-68. Will be helpful to read the description of the CM_CLKSEL1_EMU - Modules clock selection register CLKSEL_PCLK bits which which selects the PCLK clock divisor:

http://www.ti.com/lit/ug/sprugn4r/sprugn4r.pdf

Tsvetolin Shulev

Processors

Processors forum

dss signal for pclk less than 60MHz