• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 121 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

6614EVMARMBooting

tv sagar
Intellectual 300 points
Other Parts Discussed in Thread: TMS320TCI6614

Hi,

I am working on TMS320TCI6614(appleton) EVM and i am following the SC-MCSDK_user_guide available in sc_mcsdk_bios_2_00_00_08 docs to boot the arm processor. I followed the steps given in the user guide document  (page no 14) Running the linux kernal on EVM (booting linux kernal through CCS). As given in the steps after loading zImage_evm_6614.bin to the target, target is halting at 0x80008000 and when i am doing Resume(Run) nothing is showing in the serial port. According to the document Linux running log will be shown in the serial port. Am i doing any thing wrong. Appreciate your help.

Thank You,

VSagar.

  • 0
    TI__Mastermind 30825 points

    VSagar,

    TCI66x devices are supported directly through your local Field Application Engineer.  Please contact your local FAE for support.  If you are not sure who your local FAE is, then please contact your local technical sales representative and they will be able to put you in contact with your local FAE.

    Best Regards,
    Chad