Other Parts Discussed in Thread: TMS320C5515, ADS1298R
Hello, I'm using the tms320c5515 combined with the ads1298r. The supplied examples compile and run ok. I'm now implementing a BIOS5 supported application. I tried to use the CLKOUT signal for debugging. I used the CPU.ST3_55 register and the SYS.CCSSR register. Making all selections I get high and low signals but, only a clock signal in MODE9 of about 2.3 Mhz. So, now I'm confused on how to reflect the SYSCLK! Please advise?
k.rgds., Laurent
