• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 349 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6416T DSK

abbes kacem
Prodigy 15 points

Other Parts Discussed in Thread: TMS320C6416T

Hi,

I want to ask how i can use the data that results from the conversion of an analogic signal by the AIC23 codec implemented in the  TMS320C6416T DSK using CCS V4.0
Can I regenerate the signal after conversion?

  • 0
    TI__Guru* 84110 points

    Abbes,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

    Yes, you can regenerate the signal after conversion. Please refer to the Technical Reference and schematic that are provided by the board vendor when you bought the C6416T DSK.

    For more information on the AIC23, please refer to the datasheet for that device. It can convert both directions.

    Regards,
    RandyP