Sysbios and Lauterbach

Stefan B

Other Parts Discussed in Thread: SYSBIOS

I try to start a sysbios project with a Lauterbach Jtag Debugger. It stops after Startup_execImpl(). Did anybody know this problem?

Thanks Stefan

over 13 years ago

0 judahvang over 13 years ago

TI__Mastermind 32475 points

Which version of BIOS are you using?

Is this specific to a Lauterbach debugger? What do you mean by it "stops fater Startup_execlmpl()?" Is it in the weeds or just spinning?

Judah

0 Stefan B over 13 years ago in reply to judahvang

Intellectual 745 points

I use sysbios 6_34_02_18. The project works with code composer 5.3.0 (Build, load and debug). I convert the gel-File to a practice file and try to debug with jtag (Lauterbach).

I can start running, but i come never to main. After the breakpoint, theres a exception.

I think maybe the problem is, i have no access to L4_PER (Timer, Gpio) ?

0 Stefan B over 13 years ago in reply to Stefan B

Intellectual 745 points

Here´s the practice file.

8015.bba.zip

Processors

Processors forum

Sysbios and Lauterbach