print log on dsp side

Bendney Yu

Other Parts Discussed in Thread: DM3730

hi, all

I 'm using syslink 2_21_01_05, run the syslink example on DM3730, and want to print the log setting on dsp side like system_printf() or Log_print().

I have opened the Diags.ALWAYS_ON in diags_USER*. If the slaveloader in sample need some arguments to print the log?

Best Regards,

Bendney

over 12 years ago

0 GAnthony over 12 years ago

TI__Intellectual 2790 points

Benlu:

SysLink does not currently support easily printing DSP Log_print statements to the ARM side.

For some solutions, please see this post: http://e2e.ti.com/support/embedded/linux/f/354/t/182383.aspx

But, if you have CCS connected to the DSP, you could point the memory window to the SysMin module's output buffer to see the trace, or see the SysMin buffer in ROV.

See here also:

http://e2e.ti.com/support/embedded/linux/f/354/p/245367/860975.aspx#860975

Regards,

- Gil

Processors

Processors forum

print log on dsp side