How to capture image from Davinci TMDSIPNCAM8127j3 camera on linux command line

RAJ M

Other Parts Discussed in Thread: DM385

Hi,

I have TI IPNC TMDSIPNCAM8127j3 camera on DM385 soc. i can stream video on rtsp protocol through VLC media player. i want to capture image in linux command line.

Please guide how to do this.

over 12 years ago

0 VISHWANATH RAJU over 12 years ago

Prodigy 100 points

Hi Raj,

I have a some what similar issue. Did you got any solution for your thread.

If you can help me please find the link.

http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/p/292026/1018197.aspx#1018197

0 Ravikiran HV over 12 years ago in reply to VISHWANATH RAJU

Mastermind 8715 points

Hi,

I am not sure about the available Linux commands on DM8127 to capture video. Instead of command line I suggest below options.

If you want RAW or YUV data to capture, use capture display mode and dump the data to file dump instead of display it.
If you are looking for encoded data on IPNC, refer mcfw demos, where file dump options are already available, and you need to just enable the flag/macro.

Processors

Processors forum

How to capture image from Davinci TMDSIPNCAM8127j3 camera on linux command line