Question about building Qt4.8.4 with Am335x Starter Kit

wu jk

When building with option "-embedded arm" and "-xplatform qws/arm-arago-linux-gnueabi", I meet an error "cc1plus: error: unrecognized command line option "-mfpu=neon"" in document /src/gui/image/qimage_neon.cpp. What should I do to correct the error? Would someone help me? Thank you!

over 12 years ago

0 wu jk over 12 years ago

Prodigy 80 points

And my system is Ubuntu 10.04.

0 Dave Gerlach over 12 years ago in reply to wu jk

TI__Intellectual 1830 points

Hello,

Where did you get your copy of the Qt source from? Where did you get the configuration you are using from? You can find a guide on building Qt here: http://processors.wiki.ti.com/index.php?title=Building_Qt. Keep in mind that the version of Qt here is different and also you will be using arm-arago-linux-gnueabi toolchain rather than arm-none-linux-gnueabi but the general method should be the same.

A configuration you can use for building this version of Qt can be found here: https://github.com/prabindh/qt-configs/tree/master/qt4.8

Regards,

Dave

Processors

Processors forum

Question about building Qt4.8.4 with Am335x Starter Kit