Error in debugging example project!

Hi Rahul,

The red boxes shown in your screenshot are not errors. The bottom red box means that CCS is trying to find the C source for the currently executing assembly instruction. If you have the source file, you can always click "Locate File..." and find the source file on your computer. Once CCS knows where to find the source file, it will open it up and show you which line of the code is currently executing.

The top red box is showing that your program exited. Since there was no console output, I am wondering if the print buffers did not get flushed. Can you look at SysMin module view in ROV ?

Best,

Ashish

Thanks Ashish,

1. I did not fine exit.c file in my project folder.

2. Here the screen shot after clicking on SysMin.

Thanks,

Rahul

Hi Rahul,

I believe the exit.c file comes from the C runtime library. Since you dont have the library source, you cannot view the C code for it. The exit C code is not important here.

I am still not very clear about the issue you are having. Are you expecting some console output in the example you are testing and not seeing anything ? Also, are you running a BIOS example and if yes which one ?

Best,
Ashish

Example: taskMutex

Thanks Alan, I got it

Thanks,

Rahul