• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 98 subscribers
  • Views 259 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

unable to get the GUI

mukesh thakur1
Prodigy 120 points

Other Parts Discussed in Thread: 4460

HI

I am trying to bring the GUI on the blaze tablet,but once i touch the screen it get restart again.I am trying several times .What is the problem?

How to resolve it.

Thanks in advance!!!

Regards

MUkesh

  • 0
    TI__Prodigy 50 points

    Hi Mukesh,

    Please specify the the Blaze tablet HW, e.g. "4460 ES.1.1 GP 1.5Ghz", the release you are trying to boot (link if you built it) and whether you made some modifications on top of the release.

    Thanks,

    Tsvetan

  • 0 in reply to Tsvetan Erenditsov-XID
    Prodigy 120 points

    Hi Tsvetan,

    I am using the Blaze tablet HW "4460ES.1.1 GP 1.5Ghz".I just build the kernel and push the new image to the target and trying to boot the Tablet.

    Its get booted properly,but GUI is not coming,even when i touch the screen it get restarted. I did not made any changes.

    Is it a driver problem ?Which driver ?How to find it and fix it ?

    Thanks

    Mukesh

  • 0 in reply to mukesh thakur1
    TI__Prodigy 50 points

    Hi Mukesh,

    In order to help you I need the software release you are using and whether there are modifications on top of it. E.g. here are many Blaze Tablet release notes: http://www.omappedia.com/wiki/Release_Notes . Please specify if you are using one of them. Also helpful will be if you connect a console and send the log when booting.

    Regards,

    Tsvetan