how to rebuild c6678 SRIO LIB

Hi Si,

Use the makefile at pdk_C6678_1_1_2_6\packages\ti\drv\srio,

Thanks,

HR

HR,

Thanks for your reply.Can you tell me the Specific steps to use the makefile? Because I have not used makefile  before!

Thanks,

Si

 Hi Si,

Use (change the path to your installed CCS directory) - 

C:\<CCS Installed Directory>\ccsv5\utils\bin\gmake clean
C:\<CCS Installed Directory>\ccsv5\utils\bin\gmake all

Thanks,

HR

Hi HR,

Thank you very much for you relpy! 

I have a try, but it is not right! Below is the  picture：

 If I just want to rebuild the srio lib, not all the lib , what need I do? I think " gmake all "  command will rebuild all the lib!

And   if I want to rebuild the srio lib to get the big endian srio lib, what need I do?

Thanks,

Si

Hi Si,

You need to run it from the makefile directory so go to the directory pdk_C6678_1_1_2_6\packages\ti\drv\srio and than run the clean and all. I didn't tried it but it looks as it will build both little and big endian,

Thanks,

HR